Meter readings need to be entered into your SRECDelaware Account portal every month, between the 1st and the 15th of the month.

In order to enter your meter reading, click on the “My Contracts” tab.

Screen Shot 2014-05-27 at 11.55.00AM

From here, click on “Enter Reading.”

Screen Shot 2014-05-27 at 12.04.36PM

Before entering meter readings, it is important to distinguish what type of reading you should enter. There are two types of methods for entering readings:

1. Actual Monthly Readings- If this is the type of reading you enter, you will be entering the actual production of your system in a given month.

2. Cumulative Meter Readings- If this is the type of reading you enter, you will be entering the cumulative generation your system has produced in its lifetime. Our system will use this entry to automatically generate your monthly production.

Once you click on the “Enter Reading” button, a screen will appear where you can enter your monthly meter reading. Before entering, look to the lower right hand corner of the screen. Here, it will tell you which type of reading you should enter. It will say one of two things: How to Enter Readings or How to Enter Production.

Screen Shot 2014-05-21 at 4.52.21PMScreen Shot 2014-05-21 at 4.53.21PM

If it says “How to Enter Readings,” then you want to enter the cumulative generation of the system into the box under where it says “Meter Reading.” If it says “How to Enter Production,” you want to enter the actual monthly production in the box where it says “Production.” In this case, make sure the correct month is listed next to this box.

Once you enter your meter reading into the appropriate box, click “Submit.” This will save your meter reading into our system.

If at any time you would like to change the type of meter readings you enter, you can email SRECDelaware at customerservice@srecdelaware.com and we can assist you with the switch.

 

One comment

Comments are closed.